Hard Drive Carrier Indicators - Supermicro SuperServer 6029TR-HTR User Manual

Removing a Drive from a Drive Carrier
1. Remove the screws that secure the hard drive to the carrier and separate the hard drive
from the carrier.
2. Replace the carrier back into the drive bay.
Figure 3-3. Mounting or Removing from a Drive Carrier

Hard Drive Carrier Indicators

Each hard drive carrier has two LED indicators: an activity indicator and a status indicator. In
RAID configurations, the status indicator lights to indicate the status of the drive. In non-RAID
configurations, the status indicator remains off. See the table below for details.
LED Color
Activity LED Blue
Status LED Red
Red
Red
Red
Red
Chapter 3: Maintenance and Component Installation
State Status
Blinking I/O activity
Solid On Failed drive for SAS/SATA/NVMe with RSTe support
Blinking at 1 Hz Rebuild drive for SAS/SATA/NVMe with RSTe support
Blinking with two Hot spare for SAS/SATA/NVMe with RSTe support
blinks and one stop
at 1 Hz
On for five seconds, Power on for SAS/SATA/NVMe with RSTe support
then off
Blinking at 4 Hz Identify drive for SAS/SATA/NVMe with RSTe support
37