Advertisement
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been dropped or the cabinet has been damaged.
d. When the video product exhibits a distinct change in performance.
ADDITIONAL CAUTIONS:
Be careful not to shake the camera.
Please avoid places where direct sunlight may shine on the camera.
Please avoid places where there are frequent vibrations or shocks.
Please avoid places where the temperature exceeds 122°F / 50
Please avoid storing and operating the camera in water.
Please avoid water spills on the video connectors and the DC jack connectors.
Make sure the power input is correct.
WARRANTY
This product is covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased. We have no other way to
verify the purchase record without the serial number on the camera sticker; therefore, it should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided immediately. It is the customer's
responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result in termination of the warranty.
TROUBLE SHOOTING: MEASURING SUPPLIED VOLTAGE WITH METER
Other Considerations for Trouble Shooting Power:
1. Wire Quality: Copper or copper over steel
2. Wire Gauge: 18 AWG or smaller
3. Wire Type: Stranded or solid
4. Wire Length: 250ft or more
5. Power Consumption by the camera: In ampere (A) or milliampere (mA)
6. Wire Quality = Longer distance = Good voltage = Less current draw (ampere) from power supply.
7. Voltage and current are closely related to how the camera operates. The lower the voltage, the more current is needed. The higher the voltage, the lower the
current is needed.
VOLTAGE
*NOTE: The wire gauge is also an important factor in supplied voltage.
TROUBLE SHOOTING: MEASURING SUPPLIED CURRENT WITH METER
CURRENT
http://www.okinausa.com
o
C or temperatures lower than 104°F / -10
To get the true current draw, you must measure from the camera power side after the
camera is connected to the camera power.
o
C.
EIR48X-42VF_EIR56X-42VF922_rev051909
Advertisement
