Protection Against Environmental Effects - EUCHNER MGB-L0 AR Series Operating Instructions Manual

Operating Instructions Safety Systems
MGB-L0...-AR.-... and MGB-L0...-AP.-...
3 mm
9 Remove cover and undo hexagon socket screw.
AT Reposition the door handle by 90° in clockwise direction and fasten
it again.
A Tighten hexagon socket screw to 3 Nm
Figure 12: Changing actuating direction, steps 9 and A

10. Protection against environmental effects

Lasting and correct safety function requires that the system must be protected against foreign bodies such as swarf, sand,
blasting shot, etc., which can become lodged in the interlocking and handle modules. For this purpose a suitable installation
position should be selected.
Cover device during painting work!
20
9 11
10
CLOSED
OPEN
A State after repositioning
Figure 13: Changing actuating direction, final state
(translation of the original operating instructions) 2112657-13-05/18