Table of Contents
Advertisement
Control
The Control page provides the general control of the instrument such as output on/off as
well as the AC/DC voltage and frequency settings. The command line for SCPI commands
can also be accessed here.
Figure 45 - Source Control
Log Out
The Log Out will exit the web page and go back to login screen. The instrument can be
connected via LAN (Ethernet) or Telnet client with a socket port of 5024 Socket
connection. Socket connection is available for communication via LAN (Ethernet)
interface. Users can use this port to open a raw socket connection for sending remote
commands. The socket port is: 5025
57
Advertisement
Table of Contents
