Table of Contents
Advertisement
Output Timer
Timer Setting
(H/M/S)
External Ref.
Remote Inhibit
Transient
ON or OFF
0 to 99 (hours) : 0 to 59
(minutes): 0 to 59
(seconds)
OFF or LEVEL or AMP
ON or OFF
ON or OFF
29
Enable/disable the output timer.
Note: This function is available in
display 2 of 3 only.
Set the timing interval of output
timer. When the output is turned
on the timer will count down to 0
and turn the output off.
Enable/disable the input of the
external reference signal
OFF: Function disable.
LEVEL: Input DC reference voltage
(0 to ±10 V) via the digital IO
connector to control output
voltage.
AMP: Input reference waveform to
BNC connector (-6 to +6 V) to
control output waveform.
Note: If the input frequency is over
1200 Hz, the amplitude of output
will diminish.
Remote shutdown function.
When output voltage is changed,
the instrument will output a pulse
signal on "Trans" at the digital I/O
terminal.
Advertisement
Table of Contents
