The instrument provides 3 display screen options for accessing commonly used measurements
and settings. Each of these screens can be selected by pressing the
repeatedly.
Parameter
Volts (rms)
Volts (DC)
Freq (Hz)
Sync source
Phase Ctrl
Phase (deg)
Display 2 of 3
This display shows all 12 power measurements and an output timer.
Figure 6 - Display Description
Figure 7 - Display 1 of 3
Description
AC output Vrms setting
DC output setting
Output frequency setting
Select Phase or Immed (immediate)
Set 'Master' or 'Slave' for 3-phase operation
Phase angle setting
Table 1 – Display 1 of 3 Settings
8
softkey
Display x of x