Table of Contents
Advertisement
List operation pages
Press the List softkey, refer to List Parameter Table for settings details.
Refer to Table 6 – List Mode First Page. The first page parameters are common to all the
steps added under the second page parameters. This first page only needs to be
configured once for List 0. Use the arrow keys (▲ ▼ ◄ ►) to move the cursor to the
wanted parameter of the List page. Then press the ENTER Key to change its value.
Configure all the parameters for the List mode first page.
When all of the values for the First page have been configured, press List Config softkey
to move to the Second page. The Step No. will indicate "New" as the values have not
been stored in memory yet. Empty Step 100 and current Step 0 will be indicated in the
Figure 18 - List Mode first page
Parameters
Example Settings
List
Infinity
Repeat
Base
Sync Source
Phase (deg)
Table 7 - List Mode First Page
22
0
OFF
02
Time
Phase
0.0
Advertisement
Table of Contents
