B+K precision 9833B User Manual page 65

Check the box to enable data logging and set the desired sampling interval. The sampling
interval is displayed in seconds (s). Data logging will start when the output is enabled.
Output Timer
The output timer is used to disable the output after a certain period of time. The timer can be
set from 1 second to over 277 hours.
To enable output timer, click 'Setting' and the following menu will appear:
Check the box under 'Timer setting' to enable the timer. Set the desired time in seconds (s)
and click 'Ok' to confirm. The timer will start when the output is enabled.
52