Roland VersaUV LEC2-640 Regular Maintenance Manual page 31

1.
Clean the print heads.
Procedure
Remove any media.
A
Remove the media clamps.
B
Press [FUNCTION].
C
Press [ ].
D
Press [ ] several times to display the screen shown below.
E
CLEANING
MANUAL CL.
Press [ENTER].
F
When the media clamp removal message is displayed, press [ENTER] again. After "NOW
PROCESSING.." is displayed, the screen shown below appears.
Also, the print head moves to the left end of the platen.
FINISHED?
I MP ORTA NT
Do not press [ENTER] at this stage. Press [ENTER] after cleaning is complete. If you press [ENTER]
at this stage, wait for the screen to change as shown in the following figure, and then press [ENTER]
again.
CLEANING...
>>
CLEANING
MANUAL CL.
Open the front cover.
G
01:45
2.Regular Maintenance
Manual Cleaning
9