Roland VersaUV LEC2-640 Regular Maintenance Manual page 16

Maintenance That Must Be Performed Daily
2.
Performing Normal Cleaning
Procedure
Press [ ] to display the screen shown below.
A
CLEANING
NORMAL CL.
Press [ENTER].
B
The screen shown below appears, and then cleaning starts. The (approximate) remaining time
for the procedure is displayed on the screen. (The display shown below is an example. "01:45" =
"1 minute and 45 seconds")
CLEANING...
>>
When finished, the screen shown below appears again.
CLEANING
NORMAL CL.
Press [ ].
C
CLEANING
TEST PRINT
Press [ENTER].
D
Perform a printing test again to check whether the dot drop-out and dot displacement have
been corrected.
Check to make sure the dot drop-out or dot displacement has been corrected.
E
If the problem persists, try performing normal cleaning again. If the printer has been used for a
long period, dot drop-outs may not be fixed even after performing normal cleaning two or three
times. If this is the case, clean using a different method.
P. 23 "When Normal Cleaning Is Not Effective"
"
14
01:45
2.Regular Maintenance