Tiger JPB-W Series Operating Instructions Manual page 17

Detaching/attaching the inner lid
„ How to detach
Pull up the inner lid release button and
detach the inner lid toward you.
„ How to attach
Set the right and left tabs of the inner lid in the
slots securely.
Tab
Slot
Note
● Do not pull on the lid gasket or inner lid gasket.
Once it is detached, it cannot be reattached.
If the lid gasket or inner lid gasket comes off, consult your
dealer.
Inner lid
Attaching the gasket for depressurization
• Be sure to attach it in
Front side
the correct direction.
Otherwise rice may not Gasket for depressurization
be cooked well.
• If the gasket for
depressurization
Insert
is hard to attach,
moisten it with a little
water for smooth
attachment.
32
Inner lid release button
(1) Pull up
(2) Detach
(1) Insert (2) Push in until it clicks
Lid gasket
Lid
Inner lid gasket
Do not remove the gaskets.
Do not press or pull them
forcibly. Doing so may cause
steam leak or stuck external
lid resulting in failure.
Gasket for depressurization
Pull
Removing and attaching the steam cap
„ Removing the steam cap
1
Insert your fingers into the
opening of the lid and pull up
the steam cap to remove it.
Steam cap
2
Turn over the steam cap and
remove the cap body as shown
in the figure.
(2)Open
(3)
Detach
(1)Press
Cap body
Installing the steam cap gaskets
Carefully set the gasket in place as shown in the
figure. If it is not fitting well, it may come off or
cause steam leak resulting in failure.
Note
● Do not detach the ring gasket.
If it has come off, attach it as it was.
● If the gasket is hard to attach, moisten it with a
little water for smooth attachment.
„ Attaching the steam cap
1
Fit and engage the cap body to
the cap lid.
Cap body
Cap lid
(1)
(1)Fit
2
Push in until it clicks.
Tab
(2) Push in until it
clicks.
3
Attach it to the rice cooker
securely.
Gasket
Set in
Cap body
Ring gasket
33 33