Table of Contents
Advertisement
Installation
Warning
ALWAYS connect a wired or wireless remote controller
(e.g. BRC1E, BRC1H, BRC7), otherwise the Daikin
Residential Controller will NOT operate.
1
Choosing and installation site
The WLAN adapter should be sited in a place where:
The adapter is not in the path of direct sunlight.
The adapter is away from the source of heat or steam.
There is not source of machine oil vapour (this may shorten indoor
unit life).
The adapter is at least 1 m away from any television or radio set
(unit may cause interference with the picture or sound).
Distance between the indoor unit and the WLAN adapter is within
lenght of WLAN cable.
2
Installation of WLAN wire harness to PCB of
indoor unit
Connect wire harness (D) of WLAN adapter to connectors X35A and X50A
on indoor unit PCB according to WLAN controller connection diagram.
PCB
Wire harness (D)
Always turn off the power supply
when installing. (Touching the
electrical parts can cause an elec-
tric shock.) The main switch of the
installation is at the outdoor unit.
Wireless LAN
connecting adapter
English 7
Advertisement
Table of Contents
