Sony MSW-900P Operation Manual page 60

VTR operation status and status indicators
2
Warning indicators
RF: Lights if the recording heads are clogged.
SERVO: Lights if the servo motor fails.
HUMID: Lights if condensation is on the drum.
SLACK: Lights if the tape is not winding properly.
For more information, see "6-3 Operation Warnings" on page 6-14.
Note
If the tape in the VTR becomes slackened, an error code appears
automatically on the display section of the display panel.
For more information refer to the Maintenance Manual.
2-42
Chapter 2 Locations and Functions of Parts and Controls
Lights during playback.
PB VITC NDF EXT-LK
H MIN
TAPE E
BATT E
RF SERVO HUMID
VTR operation and status indicators
OVER EMPH OVER
HOLD
0
10
SEC FRM
20
B
30
F
40
SLACK
PEAK dB