Sony MSW-900P Operation Manual page 64

3 BATT (battery) indicator
This indicator starts flashing when the battery connected to the
camcorder has fallen, and stays lit when the battery is exhausted.
2
The level at which the indicator starts flashing can be set on the
BATTERY page of the MAINTENANCE menu.
For details, refer to the Maintenance Manual.
4 (warning) indicator
This indicator lights up when the camcorder is used under one or more of
the following conditions and if the corresponding items have been set to
ON on the '!' LED page of the USER menu.
• The gain is set to anything but 0 dB.
• The SHUTTER selector is ON.
• The WHITE BAL switch is set to PRST.
• ATW is being used.
• The lens extender is used.
• The FILTER selector is set to anything but ND:1/CC:B.
• The reference value of the auto iris adjustment is anything but the
standard value.
5 Spare indicator
This is a spare indicator. A menu operation makes it possible to use this
as a REC indicator.
For details, refer to the Maintenance Manual.
6 VTR SAVE indicator
Lights up when the VTR section is set to power save mode by setting the
VTR SAVE/STBY switch to SAVE.
2-46
Chapter 2 Locations and Functions of Parts and Controls