Sony MSW-900P Operation Manual page 306

5
Check each of the following operations and make sure that the
indicator lights if the corresponding item has been turned on in the '!'
LED page of the USER menu.
• Set the gain to anything but 0 dB by using the GAIN selector and
the GAIN SW page of the OPERATION menu.
• Set the SHUTTER selector to ON.
• Set the WHITE BAL switch to PRST.
• Use the lens extender.
• Set the inner FILTER (ND filter) selector to anything but "1".
• Set the outer FILTER (CC filter) selector to anything but "B".
• Set the reference value of the auto iris to other than the standard
value.
6
Push the SHUTTER selector from ON to SEL repeatedly, and check
6
that the shutter setting changes on the viewfinder screen.
7
Pointing the camera at a suitable subject, focus the camera and
check the picture on the viewfinder screen.
8
Set both of the AUDIO IN switches to FRONT, and check that when
sound is input to a microphone connected to the MIC IN connector
on the front of the camcorder, the audio level indicators appear on
the viewfinder screen.
9
Check that setting the ZEBRA switch to ON and OFF makes the
zebra pattern appear and disappear on the viewfinder screen.
Note
The current display status may inhibit one or more of the displays or
operations mentioned in steps 3 to 9. If this happens, set the desired
items in the VF DISP1 and VF DISP 2 pagse of the USER menu.
For details, see "4-7-2 Selecting the Display Items" on page 4-69.
6-4
Chapter 6 Maintenance