Downrod (continued)
www.CasablancaFanCo.com
1.888.227.2178
3/8"
8"
KEEP!
Remove the pre-installed
The wires can be cut,
Slide the adapter cover onto the
Raise the adapter cover.
setscrew so that the downrod
but leave at least 8"
downrod (for standard mount only),
Tighten the setscrew
can be inserted.
extending from the top
then hand tighten the downrod at
with pliers. DO NOT
of the downrod.
least 4-5 full turns until it stops.
HAND TIGHTEN.
8"
3/8"
If the setscrew is not tightened
securely, the fan may fall.
8
M8538-01 • 01/12/16 • © 2016 Casablanca Fan Company