Table of Contents
Advertisement
Switch Housing & Light Kit
www.CasablancaFanCo.com
1.888.227.2178
Feed the wire plug through the center
Insert the third machine screw, found in
Screw two machine screws
from the
hardware bag halfway into
hole of the upper switch housing, then
the
hardware bag, into place and then
wrap keyhole slots around the screws and
tighten all three screws.
the mounting plate on the bottom of the
twist clockwise.
motor housing. It does not matter which
two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the
switch housing fixture falling.
14
M8538-01 • 01/12/16 • © 2016 Casablanca Fan Company
Advertisement
Table of Contents
