Table of Contents
Advertisement
Chapter 7
•
Firmware Version
•
Hardware Version
•
Operation Mode
- This field displays the current operation mode of the router.
•
Wired
- This field displays the current settings of the LAN, and you can configure them
on the
Setting
>
Network
•
MAC address
•
IP address
- The LAN IP address of the router.
•
Subnet Mask
•
Host Network
- This field displays the wireless name and connection status of the root
AP.
•
Wireless 2.4GHz/5GHz
wireless function, and you can configure them on the
>
Wireless Settings
•
Local Wireless Name (SSID) -
network.
•
Channel
- The current wireless channel in use.
•
Mode
- The current wireless working mode in use.
•
Channel Width
•
MAC Address
•
Traffic Statistics
- The router's traffic statistics.
•
Received (Bytes)
•
Received (Packets)
•
Sent (Bytes)
•
Sent (Packets)
•
System Up Time
- The length of the time since the router was last powered on or reset.
Click
Refresh
to get the latest status and settings of the router.
7. 2.
Operation Mode
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Setting
>
3. Select the operation mode as needed and click Save.
- The version information of the router's firmware.
- The version information of the router's hardware.
>
LAN
page.
- The physical address of the router.
- The subnet mask associated with the LAN IP address.
- This field displays the basic information or status of the
page.
The wireless network name (SSID) of the extended
- The current wireless channel width in use.
- The physical address of the router.
- Traffic in bytes received from the WAN port.
- Traffic in packets received from the WAN port.
- Traffic in bytes sent out from the WAN port.
- Traffic in packets sent out from the WAN port.
Operation
Mode.
Configure the Router in Range Extender Mode
Setting
>
Wireless 2.4GHz/5GHz
183
Advertisement
Table of Contents
