Wireless - TP-Link TP-TL-WR1043N User Manual

Chapter 8
• MAC Address - The physical address of the LAN ports. The value can not be changed.
• Type - Either select
to configure IP address manually.
• IP Address - Enter the IP address in dotted-decimal notation if your select
(factory default - 192.168.0.1).
• Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
• Gateway - The gateway should be in the same subnet as your IP address.
Note:
• If you have changed the IP address, you must use the new IP address to login.
• If you select Dynamic IP(DHCP), the DHCP server of the router will not start up.
• If the new IP address you set is not in the same subnet as the old one, the IP Address pool in the DHCP Server will
be configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured.
8. 4.

Wireless

In this section, we will take the settings for the 2.4GHz wireless network for example.
8. 4. 1. Wireless Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting >
3. Configure the basic settings for the wireless network and click Save.
Dynamic IP(DHCP)
Wireless 2.4GHz > Wireless
Configure the Router in Client Mode
to get IP address from DHCP server, or
Settings.
Static IP
Static IP
206