Chapter 5
•
Line Type
- Select the right type for you network connection. If you are not sure,
please consult your ISP.
•
Egress Bandwidth
•
Ingress Bandwidth
5. 11. 2. Rules List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Advanced
the Bandwidth Control rules.
•
Description
- This is the information about the rules such as address range.
•
Egress Bandwidth
the WAN port. The default is 0.
•
Ingress Bandwidth
the WAN port. The default is 0.
•
Enable
- This field displays the status of the rule.
•
Modify
- Click
Modify/Delete
¾ To add a Bandwidth control rule:
1. Click
Add
New.
2. Enter the information like the figure shown below.
- The upload speed through the WAN port.
- The download speed through the WAN port.
>
Bandwidth Control
- This field displays the max and min upload bandwidth through
- This field displays the max and min download bandwidth through
to edit/delete the rule.
Configure the Router in Hotspot Router Mode
>
Rules
List, and you can view and configure
141