Table of Contents
Advertisement
Chapter 6
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Setting
>
3. Click
Add New
and fill in the blanks.
1 ) Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) of the client for which
you want to reserve an IP address.
2 ) Enter the IP address (in dotted-decimal notation) which you want to reserve for
the client.
3 ) Leave the
Status
4 ) Click Save.
6. 6.
System Tools
6. 6. 1.
Working Mode
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Setting
>
router as needed and click Save.
When
Control the system mode by software
If you want to enable it, please log in to the web management page and go to
system mode by
software.
DHCP
>
Address
Reservation.
as Enabled.
System Tools
>
Working
is checked, the operation mode switch on the router will be disabled.
Configure the Router in Access Point Mode
Mode. Select the working mode for the
Working Mode
to uncheck
Control the
172
Advertisement
Table of Contents
