Wireless - TP-Link TP-TL-WR1043N User Manual

Chapter 7
• If the new IP address you set is not in the same subnet as the old one, the IP Address pool in the DHCP Server will
be configured automatically, but the Virtual Server and DMZ Host will not take effect until they are re-configured.
7. 4.

Wireless

In this section, we will take the settings for the 2.4GHz wireless network for example.
7. 4. 1. Wireless Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Setting >
3. Configure the basic settings for the wireless network and click Save.
• Root AP Connection
Disable to enable/disable the root AP connection.
• Wireless Name of Root AP
• MAC Address of Root AP
• Mode - Select the desired mode. It is strongly recommended that you keep the
default setting 11b/g/n
to the router.
• Channel Width - Select any channel width from the drop-down list. The default setting
is Auto, which can automatically adjust the channel width for your clients.
• WDS Mode -This field determines which WDS Mode will be used. It is not necessary
to change the WDS mode unless you notice network communication problems
Wireless 2.4GHz > Wireless
- Displays the status of the root AP connection. Click Enable/
- The SSID of the AP that you want to connect to.
- The MAC address of the AP that you want to connect to.
mixed, so that all 802.11b/g/n wireless devices can connect
Configure the Router in Range Extender Mode
Settings.
185