Network - TP-Link TP-TL-WR1043N User Manual

Chapter 4
4. 2.

Network

4. 2. 1. 3G/4G
To use the 3G/4G function, you should first insert a 3G/4G USB modem into the 3G/4G
USB port of the router. There is already much 3G/4G USB modem information embedded
in the router. The USB modem parameters will be set automatically if the SIM/UIM card
is supported by the router.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Advanced
• Location - Please select the location where you're enjoying the 3G/4G card.
• Mobile ISP - Please select the ISP (Internet Service Provider) providing the 3G/4G
service. The router will automatically fill in the default Dial Number and APN of that
ISP.
• Connection Mode
3G/4G modem.
• Connect on Demand
connection after a specified idle period of the Internet connectivity. If your
Internet connection has been terminated due to inactivity,
enables the router to automatically re-establish your connection as soon as
> Network > 3G/4G.
- Please select the connection mode to access the Internet with the
- You can configure the router to disconnect your Internet
Configure the Router in Standard Router Mode
Connect on Demand
25