Table of Contents
Advertisement
Chapter 7
7. 3.
Network
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Setting
>
3. Configure the IP parameters of the LAN and click Save.
•
MAC Address
- The physical address of the LAN ports. The value can not be changed.
•
Type
- Either select
to configure IP address manually.
•
IP Address
- Enter the IP address in dotted-decimal notation if your select
(factory default - 192.168.0.1).
•
Subnet Mask
- An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
•
Gateway
- The gateway should be in the same subnet as your IP address.
•
Allow remote access
address in browser.
Note:
• If you have changed the IP address, you must use the new IP address to login.
• If you select
Dynamic
IP(DHCP), the DHCP server of the router will not start up.
Network
> LAN.
Dynamic IP(DHCP)
- Allow remote devices to access the router by inputting the IP
Configure the Router in Range Extender Mode
to get IP address from DHCP server, or
Static IP
Static IP
184
Advertisement
Table of Contents
