Table of Contents
Advertisement
• ANT TD height: Vertical distance (m) between the antenna and the transducer.
To enter the number, move the cursor onto the column of the value and push the
knob, then rotate the knob to change the number, and push the knob to set the
number.
[Stabilization Area]: When heaving exceeds the value set here, stabilization is
stopped and the stabilization icon at the top of the screen disappears. However, the
[Stabilization] function is kept [ON]. When heaving is once again less than the value
set here, stabilization is restarted and the stabilization icon reappears.
Note: For the heaving feature, set the SC-30/50/110 Satellite Compass
follows.
Feature
Sentence
Baud rate
Cycle
Format
3.8
Telesounder Setting
When a telesounder TS-80M2, TS-85 or TS-7100 is connected to this equipment, set
the telesounder mode for communication with mother/sister ship.
Note 1: When this equipment is used a high speeds in waters shallower than 20 m,
set the TX rate to a lower setting from the TX setting menu.
Note 2: TS-80M2 should be used in P-mode only. Confirm that the TS-80M2 is set to
"P-mode"
Note 3: When using the TS-85 for data transmission between vessels, there are some
restrictions. Possible fish finder combinations are as follows:
Mother
FCV-1900/B/G
FCV-1900/B/G
FCV-1200L/1500L
1. Referring to steps 1 to 4 of "Select the transducer" in section 3.3, open the [XDCR
Setting] menu.
2. Rotate the ENTER knob to select [Telesounder] tab.
3. Select [External Telesounder], then push the knob.
4. Select [On], then push the knob.
Own XDCR Setting
External Telesounder
Echo Setting
Telesounder
Fish Finder
HF TX Mode
LF TX Mode
Save Setting
5. Rotate the ENTER knob to select [Echo setting], then push the knob.
SC-50/110 (Data out setting)
ATT, HVE
38400 bps
25 ms
IEC Ed.1
Sister
FCV-1900/B/G
FCV-1200L/1500L
FCV-1900B/G
DFF1,DFF3,BBDS1 XDCR Setting
31
SC-30 (IF-NMEASC setting)
ATT, HVE
38400 bps
25 ms
-
Possible
Yes
Yes (set TVG '0' on FCV-1900 menu)
No
Telesounder
Side Looking
On
Input 1
TS-80 MARK2
FCV-1900
TruEcho CHIRP
TruEcho CHIRP
3. INITIAL SETTINGS
™
output as
Advertisement
Table of Contents
