Table of Contents
Advertisement
1. MOUNTING
1.7
Booster Box
The booster box (BT-5, option) enables connection of 5 kW transducers in 28.8 and
50 kHz. For dual frequencies, use the model BT-5-2.
1. Unfasten four binding screws to remove the cover.
2. Select a mounting location, referring to the figure below.
3. Fasten the self-tapping screws (φ5x25, supplied) at the fixing holes.
4. Fasten the cover screws to secure the cover.
1.8
Temperature Sensor
The temperature sensor (T-04MSB/04MTB, option) or transducer with temperature
sensor provides the water temperature data. To install these water sensors, see ap-
pendix 2.
GND
terminal
196±0.5
240
6
Fixing holes
4-φ6
Advertisement
Table of Contents
