Table of Contents
Advertisement
3.5
Communication Port Monitor
The communication port monitor provides information about data input/output.
1. Press the MENU/ESC key to open the menu.
2. Confirm that the [Setting] tab is selected, then rotate the ENTER knob to select
[System]. Push the ENTER knob.
3. Rotate the ENTER knob to select [NMEA Port Set&Monitor], then push the knob.
The signal port menu appears.
4. Rotate the ENTER knob to select the port whose data you want to display, then
push the knob.
5. Press the MENU/ESC key to close the menu window and show the communica-
tion port monitor display.
Input data
6. To turn off the port monitor display, press the MENU/ESC key and select [Exit],
then push the ENTER knob.
7. Rotate the ENTER knob to select [Yes], then push the knob.
The port monitor is closed.
8. Press the MENU/ESC key several times to close the menu.
NMEA1
CN-10 (NMEA1) port
NMEA2
CN-11 (NMEA2) port
SC
CN-12 (NMEA3) port
CIF
CN-6 (SONDE/TRIG) port
NMEA Port 1 Input
$GPGNS,102716.01,8900.0413,N,17859.99
99,E,A,00,0.0,0.0,0.0,0.0,0.0,S*4F
$GPMTW,27.30,C*32
$GPVHW,0.00,T359.94,M,8.10,N,,*1C
$GPVTG,359.95,T,359.95,M,6,6.48,N,,,A*7C
$GPZDA,102716.20,24,02,2015,00,00*65
[MENU/ESC]: Setting
Select Exit menu to exit
NMEA Port 1 Output
$SDDBT,102.6,f,31.3,M,17.1,F*05
$SDDPT,31.3,0.0,200.0*66
SSDDBT,T102.6,f,31.3,M,17.1,F*05
$SDDPT,31.3,0.0,200.0*66
27
3. INITIAL SETTINGS
Output data
Advertisement
Table of Contents
