3.5
Communication Port Monitor
The communication port monitor provides information for the input/output data sen-
tences of the NMEA ports.
1. Press the MENU/ESC key, then open the [Setting] tab.
2. Select [System], then push the ENTER knob.
3. Select [NMEA Port Set&Monitor], then push the ENTER knob.
NMEA1
NMEA2
SC
CIF
4. Select the port to display the input/output data, then push the ENTER knob.
5. Press the MENU/ESC key to close the menu window and show the communica-
tion port monitor display.
Input data
6. Press the MENU/ESC and select [Exit], then push the ENTER knob.
7. Select [Yes], then push the ENTER knob to close the communication port monitor
display.
8. Press the MENU/ESC key several times to close the menu.
Shows the information of the
Shows the information of the
Shows the information of the
Shows the information of the
NMEA Port1 Input
$GPGNS,102716.01,8900.0413,N,17859.99
99,E,A,00,0.0,0.0,0.0,0.0,0.0,S*4F
$GPMTW,27.30,C*32
$GPVHW,0.00,T359.94,M,8.10,N,,*1C
$GPVTG,359.95,T,359.95,M,6,6.48,N,,,A*7C
$GPZDA,102716.20,24,02,2015,00,00*65
[MENU/ESC] : Setting
Select Exit menu to exit
3. MAINTENANCE & TROUBLESHOOTING
CN-10 (NMEA1) port.
CN-11 (NMEA2) port.
CN-12 (NMEA3) port.
CN-6 (SONDE/TRIG) port.
NMEA Port1 Output
$SDDBT,102.6,f,31.3,M,17.1,F*05
$SDDPT,31.3,0.0,200.0*66
SSDDBT,T102.6,f,31.3,M,17.1,F*05
$SDDPT,31.3,0.0,200.0*66
Output data
3-5