Table of Contents
Advertisement
(2) On the rear of the iPAD, slide the battery lock switches on both sides of the lower part to the
outside.
(3) Slide down the cover to remove it.
(4) Pull the black ribbon to remove the battery.
(5) Using the stylus, press the switch exposed when the battery is removed.
All the data in memory is cleared, and memory is initialized.
CAUTION
When you completely reset the iPAD, all of
the data and information (Control Panel
settings and installed applications) in its
memory is lost
(except for the data in the flash disk area).
See the "iPAD (IPAD100-xx) Systems
Users Guide" to restore the applications.
⌦ This completes the operation.
34
Advertisement
Table of Contents
