Client Side Map Descriptor Parameters; Fieldserver Related Map Descriptor Parameters; Driver Related Map Descriptor Parameters - SMC Networks FieldServer FS-8700-130 Driver Manual

5.4

Client Side Map Descriptor Parameters

5.4.1 FieldServer Related Map Descriptor Parameters

Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function

5.4.2 Driver Related Map Descriptor Parameters

Column Title Function
Node_Name Name of Node to fetch data from
Data_Type Specify memory area type
Address Starting address of block
Length Length of Map Descriptor
Specify Loop number. To capture system level
Loop*
events specify it as 0 or omit this parameter
Specify whether driver should clear Node(s)
memory area upon receipt of "SYSTEM RESET"
Clear_on_Reset*
message from Panel.
Specify whether driver should clear Node(s)
memory area upon receipt of "SYSTEM NORMAL"
Clear_on_Normal*
message from Panel.
Function
Name of this Map Descriptor
Name of Data Array where data is to
be stored in the FieldServer
Starting location in Data Array
Function of Map Descriptor
Page 12 of 23
FS-8700-130 Notifier NCA2-NFS2-3030 Manual
Legal Values
Up to 32 alphanumeric characters
One of the Data Array names from
Section 4
0 to (Data_Array_Length-1)
specified in Section 4.
Passive
Legal Values
One of the Node names
specified in Section 5.3
Detector
Module
Detector_Trouble
Module_Trouble
Panel
Panel_Trouble
Bell_Trouble
Node_Trouble
As per Data_type
Detector
Module
1-1749
Detector_Trouble
Module_Trouble
1-159 for point troubles
Panel
1-1056 for Panel circuits
Panel_Trouble
1-96 for Panel troubles
Bell_Trouble
1-4 for Bell circuits
Node_Trouble
1-509 for Node troubles
Same as address value
-, 0-10, 0
No, Yes
Yes ,No
as