Map Descriptor Example: Standard Example - SMC Networks FieldServer FS-8700-130 Driver Manual

5.4.3 Map Descriptor Example: Standard example

This shows the standard Map Descriptor setup for one Node with 1 loop and all 159 modules and 159 detectors installed. This Node also has all
boards, panel and bell circuits
//
// Client Side Map Descriptor
//
Map_Descriptors
Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Loop , Data_Type
SMD_N2_Troubles , DA_SYS_N2
SMD_N2_PANEL , DA_N2_PANEL
SMD_N2_PANEL_T , DA_N2_PANEL_T , 0
SMD_N2_BELL_T , DA_N2_BELL_T
SMD_N2L01D , DA_N2L01D
SMD_N2L01D_T , DA_N2L01D_T
SMD_N2L01M , DA_N2L01M
SMD_N2L01M_T , DA_N2L01M_T
All Map Descriptors are
Select the array
Passive; waiting for a
for data storage
message from the Notifier
panel.
FS-8700-130 Notifier NCA2-NFS2-3030 Manual
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
, 0 , Passive , NODE2
Identify the Loop id for
which this Map
Descriptor will store
data
Page 13 of 23
For Node, Panel and
Bell mapping, the
Loop parameter is
not applicable
, Address , Length
, - , Node_Trouble , 1
, - , Panel , 1
, - , Panel_Trouble , 1
, - , Bell_Trouble , 1
, 1 , Detector , 1
, 1 , Detector_Trouble , 1
, 1 , Module , 1
, 1 , Module_Trouble , 1
Specify
Data
Type
, 508
, 1056
Node
, 96
Events
, 4
, 1749
, 159
Loop 1
Events
, 1749
, 159
Specify range,
starting address
and length