Installation - HIKVISION DS-2CE16H1T-IT3Z User Manual

Keep the camera away from liquid while in use for

non-water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The camera is applicable for both indoor and outdoor
conditions, and the application scenarios include road,
warehouse, underground parking lot, bar, etc..
The main features are as follows:
High performance CMOS sensor

Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux

with IR
IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

Internal synchronization

SMART IR mode

PoC (with -E)

3-axis adjustment

Overview
1.2
1.2.1 Overview of Type I Camera
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type II Camera
Enclosure
Mounting
Base
Clip Plate
Figure 1-2 Overview of Type II Camera

2 Installation

Before you start:
Make sure that the device in the package is in good

condition and all the assembly parts are included.
Make sure that all the related equipment is power-off

during the installation.
Check the specification of the products for the

installation environment.
Check whether the power supply is matched with

your power output to avoid the damage.
Table 0-1 Mark Description
Description
DC Voltage
Mounting Base
Sun Shield
Lens
Model I Cables
Model II Cables
Camera
Menu
Button
Power Cord
24 VAC/12 VDC
Video Cable
Power Cord
12 VDC
Video Cable
Power Cord
12 VDC
Video Cable