Table of Contents
Advertisement
Chapter 6
To find the System's Phone Number
1.
Check that the Ready indicator
2.
Press [*][6]
OR
press [*]and use the scroll keys to navigate to User Functions press [*] and enter
[Master Code].
3.
Press [1][1] or use the scroll keys to navigate to SMS Programming and press [*].
4.
Scroll to navigate to SMS Programming and press [*]. The phone number to send your
SMS commands to displays.
6.3.2 Sending SMS Commands to your System
In order to successfully send commands to your system from your cellphone, you must send SMS messages in the proper format. If
configured, commands require the inclusion of a User Access Code in your message. The access code will be verified by the sys-
tem before executing any commands.
Additional information about sending SMS commands:
Text messages are not case sensitive and extra spaces are ignored.
l
In multi-partition systems and if the User has rights to manage the desired partitions, commands can be sent to specific
l
partitions by including the partition number. For more information on partitions see: "Managing Partitions".
If the panel is configured to require an Access Code and the code is not sent or is invalid, the panel will send a noti-
l
fication to the user advising the command was unsuccessful.
The following table lists all available SMS commands with examples of how to enter the Partition number and access codes. The
format for entering commands is as follows:
Command Partition number Access Code
Stay Set
001
Note: Verify with your installer that the Partition number and access code are required in your SMS message. If one or both are
not required, do not enter them in your SMS message.
Note: Responses to Status and Alarm Memory requests may require more than 1 SMS message, depending on status of the system.
There is a 10 second delay between transmission of SMS messages.
6.3.3 SMS Commands
Commands
Stay Set
Away Set
Night Set
Unset
Activate Command Output 1
Activate Command Output 2
Activate Command Output 3
Activate Command Output 4
Deactivate Command Output 1
Deactivate Command Output 2
Deactivate Command Output 3
Deactivate Command Output 4
Bypass 001
Unbypass 001
Status Request
Alarm Memory Request
Help
is on and the system is unset.
1234
Notes
Stay sets the system
Away sets the system
Night sets the system
Unsets the system
Activates Output 1
Activates Output 2
Activates Output 3
Activates Output 4
Deactivates Output 1
Deactivates Output 2
Deactivates Output 3
Deactivates Output 4
Bypasses specified zone number
Clears the bypass from the specified zone number
Omitting the partition number causes the system to send a status report
for all partitions. To request a status report for a specific partition enter
the appropriate partition number.
Omitting the partition number causes the system to send a status report
for all partitions. To request a status report for a specific partition enter
the appropriate partition number.
The Help command generates an SMS response listing all Interactive
commands that can be sent to the module. Access Code is not required.
- 20 -
LCD Display
Date Time
JAN 02/13 2:06a
Press (*) for <>
User Functions
Press (*) for <>
SMS Programming
Press (*) for <>
GSM Phone No.
Advertisement
Table of Contents
