Safety Labels Of This Machine - Eiki EK-830 Series Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

• Upon completion of any service or repairs to this

projector, ask the service technician to perform

routine safety checks to determine that the projector

is in safe operating condition.

Information for users in the European Union

This is a device to project images onto a screen,

etc., and is not intended for use as indoor lighting in

a domestic environment.

Warning:

Do not aim a laser pointer at the lens apearture,

which may damage the DMD in the projector and

cause personal injury.

We are not responsible for the hurt and damage

caused by the improper use of laser pointer even in

warranty periond.

Air circulation

Vents in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect

it from overheating, these openings must not be

blocked or covered.

Caution:

• Hot air is exhausted from the exhaust vent. When

using or installing the projector, the following

precautions should be taken.

• Do not put any flammable objects, or spray can

near the projector. Hot air is exhausted from the

air vents.

• Keep the exhaust vent at least 1m away from any

objects.

• Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part. This area will

become hot while the projector is being used.

• Do not put anything on the projector. Objects put

on the cabinet will not only get damaged but also

may cause fire hazard by heat.

• Cooling fans are provided to cool down the

projector.

• The fan's running speed is changed according to

the temperature inside the projector.

Moving the projector

When moving the projector, take care of the lens and

retract the adjustable foot to prevent damage to the

lens and cabinet.

Caution in moving or transporting the

projector

• Do not drop or bump the projector, otherwise

damages or malfunctions may result.

• When carrying the projector, use a suitable

carrying case.

• Do not transport the projector by courier or any

other transport service in an unsuitable transport

case. This may cause damage to the projector.

Usage Notice

Directive 2009/125/EC.

For information about transporting the projector

by courier or any other transport service, consult

your dealer.

• Do not put the projector in a case before it is

cooled enough.

Caution in ceiling installation the

projector

• Only qualified personal is authorized for ceiling

installation.

• We are not responsible for the hurt and damage

caused by ceiling brakect that purchased from

unauthorized dealer even in warranty period.

• Remove the ceiling bracket immediately while not

use.

• While installing, torque screwdriver is suggested,

don't use electric or impact-type screwdriver.

• Please read the manual of bracket for details.

• Please read the Owner's Manual, and confirm

screw size and location of screw holes on the

projector

• The bracket is subject to change without notice.