• When projector is in
standby mode, only
the "Power" button
will work.
LAN Control
Controlling this Device with Web
Browser
You can control this device from a PC by using a web browser.
Connecting to the Device
1. Confirmation of the IP address of the device
Go to the "Default Settings" > "Network" menu of this device,
and verify the IP address.
2. Connection
Enter the IP address that was verified by opening the web
browser.
For example, enter http://192.168.0.100/ if the IP address is
displayed.
Crestron
Once connected, you can control the projectors via Crestron
program.
Power: Switch ON/OFF the power.
`
Source List: Correspondence between the input display and
`
input terminal of the device is as follows.
• Computer
• S-Video
• Video
Other buttons work in the same manner as those on the
`
projector control panel or the remote control do.
• HDMI1/MHL
• HDMI2
59