User Settings; Using The On Screen Display (Osd); How To Operate - Eiki EK-830 Series Owner's Manual

User Settings

• If no button
operation is made
for approximately
10 seconds, the
OSD will be closed
automatically.
42
User Settings

Using the On Screen Display (OSD)

The Projector has a multilingual On Screen Display that allows you to
make image adjustments and change a variety of settings.

How to Operate

1. To open the OSD, press "Menu" on the Control Panel or Remote
Control.
2. When OSD is displayed, use
the main menu. While making a selection on a particular page,
press "Enter" key to enter sub menu.
3. Use keys to select the desired item in the sub menu and
press "Enter" key to view further settings. Adjust the settings by
using
4. Select the next item to be adjusted in the sub menu and adjust
as described above.
5. Press "Exit", and the screen will return to the previous menu.
6. Press "Menu" or
7. To exit, press "Menu" again. The OSD menu will close and the
projector will automatically save the new settings
Main Menu
key or key.
key to return to the main menu.
Sub Menu
Image Adjustment
Picture Mode
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color Temperature
HSG
Wall Color Mode
Select
keys to select any item in
.
Standard
Standard(2.2)
White
Exit
Enter
Setting