Status Menu; Device Info (Device Information Of The Camera And Setting Status Of Switches On The Back Of The Camera) - Sony BRC-X401 Operating Instructions Manual

STATUS Menu

The STATUS menu is used to display the settings
selected with the menus. This menu only
displays the current menu settings, and you
cannot change them with this menu.
The current menu settings will vary depending
on the camera model. Press the  or  button of
the remote commander to switch PAGE.
For BRC-X400/X401
PAGE1: Items in the EXPOSURE menu
PAGE2: Items in the COLOR menu
PAGE3: Items in the DETAIL menu
PAGE4: Items in the KNEE menu
PAGE5: Items in the GAMMA/VE menu
PAGE6: Items in the ZOOM/FOCUS menu
PAGE7: Items in the PICTURE/OPT.FILTER menu
PAGE8: Items in the PAN TILT/PRESET menu
PAGE9: Items in the VIDEO OUT menu
PAGE10: Items in the SYSTEM menu
PAGE11: Device information of the camera and
status of switch settings on the back of the
camera
PAGE12: Network settings
For SRG-X400/X402/201M2
PAGE1: Items in the EXPOSURE menu
PAGE2: Items in the COLOR menu
PAGE3: Items in the DETAIL menu
PAGE4: Items in the VE menu
PAGE5: Items in the ZOOM/FOCUS menu
PAGE6: Items in the PICTURE/OPT.FILTER menu
PAGE7: Items in the PAN TILT/PRESET menu
PAGE8: Items in the VIDEO OUT menu
PAGE9: Items in the SYSTEM menu
PAGE10: Device information of the camera and
status of switch settings on the back of the
camera
PAGE11: Network settings
For SRG-X120/HD1M2
PAGE1: Items in the EXPOSURE menu
PAGE2: Items in the COLOR menu
PAGE3: Items in the DETAIL menu
PAGE4: Items in the VE menu
PAGE5: Items in the FOCUS menu
PAGE6: Items in the PICTURE/OPT.FILTER menu
PAGE7: Items in the PAN TILT/PRESET menu
PAGE8: Items in the VIDEO OUT menu
PAGE9: Items in the SYSTEM menu
PAGE10: Device information of the camera and
status of switch settings on the back of the
camera
PAGE11: Network settings
The [DEVICE INFO] and [NETWORK] screens are
only in the STATUS menu.
DEVICE INFO (Device information
of the camera and setting status of
switches on the back of the
camera)
Displays the device information. The
Administrator menu is not available for this
display.
MODEL NAME (Information - Model
Name)
Displays the model name of the camera.
SERIAL NUMBER (Information - Serial
number)
Displays the serial number of the camera.
VERSION (Information - Software
version)
Displays the software version of the camera.
NAME (Common setting - Camera name)
Displays the name applied to the camera. You
can change the name from the Administrator
menu on the web browser or RM-IP Setup Tool.
SYSTEM MODE (Video out - Format)
Displays the video output format of the camera.
IR SELECT
Displays the number of the IR SELECT switch on
the back of the camera.
SDI LEVEL
Displays the status of SDI LEVEL.
VISCA RATE
Displays the rate of the BAUD RATE SELECT
switch on the back of the camera.
49