Sony BRC-X401 Operating Instructions Manual page 7

Preset function
Up to 100 preset data can be stored in the VISCA
command and up to 256 preset data in the CGI
command.
On the PTZ Motion Sync function*
zoom work together to enable smooth preset
operations.
Equipped with RS-422 interface
The camera is equipped with RS-422 interface
which is the industry standard VISCA camera
protocol in external communication.
Equipped with PoE+ (Power over
Ethernet Plus)
The camera supports IEEE802.3at-compatible
PoE+ (Power over Ethernet Plus) and a single LAN
cable is used for power supply and control.
Compatible with VISCA over IP protocol
An IP connection can be established between
the camera and the remote controller.
Equipped with external video sync
function (BRC-X400/X401)
The camera is equipped with an external video
sync function to synchronize the camera images
on multiple cameras.
Equipped with tally lamp (BRC-X400/
X401)
The camera is equipped with a tally lamp that
instantly distinguishes cameras in use.
Supports network connection with RCP/
MSU (BRC-X400/X401)
Network connection to an optional remote
control panel (RCP) or master setup unit (MSU) is
supported.
Picture profile preset function (BRC-
X400/X401)
Picture profile presets from PP1 to PP6 can be
loaded. By using these presets, an image texture
gets close to the one shot with other cameras
with the picture profile function, and the camera
creates an image texture similar to the one of
cinematic film.
Extensibility
4K Option (SRGL-4K)
SRG-X400/X402/201M2/X120/HD1M2 (HD
model) supports 4K video output via HDMI and
3
, pan, tilt, and 4K IP streaming by installing the optional 4K
Option license. (page 68)*
NDI|HX
This camera is compatible with NDI|HX of
NewTek, Inc.
To use NDI|HX, you are required to purchase the
license key (page 93).
*1 20× optical zoom for the BRC-X400/X401 and
*2 When shooting at 1920×1080 only.
*3 Enabled by Software version 2.00
7
SRG-X400/X402/201M2
12× optical zoom for the SRG-X120/HD1M2
3