Ptz Trace (Brc-X400/X401) - Sony BRC-X401 Operating Instructions Manual

• For BRC-X400/X401, when [Trace] is selected
for [Preset mode] on the PTZF control tab, you
cannot perform any operations on the Preset
position tab. Select [Mode 1] or [Mode 2] for
[Preset mode] on the PTZF control tab to
perform operations.
Preset mode (BRC-X400/X401)
Display the current preset mode.
Preset position list
Display the numbers, names and thumbnails of the
registered presets.
Select the preset to operate.
Preview screen
Monitor the images and perform the preset setting.
Set
Store the current pan, tilt, zoom positions and
camera settings in the selected preset. For details on
the setting items that can be stored, see "Preset
Items and Image Setting File Items" (page 96).
Call
Move to the pan, tilt, and zoom positions stored in
the selected preset. The stored camera settings are
called. For BRC-X400/X401, you can select the
setting items to be reflected on the camera by the
Preset mode setting.
Add
Store the current pan, tilt, zoom positions and
camera settings as a new preset. For details on the
setting items that can be stored, see "Preset Items
and Image Setting File Items" (page 96).
Remove
Delete the selected preset and return the stored
settings to the factory settings. For details on the
setting items stored in each preset, see "Preset
Items and Image Setting File Items" (page 96).
Rename
Change the name of a selected preset. Up to 32
alphanumeric characters can be used to set the
name.
Thumbnail (checkbox)
After selecting the checkbox, register the camera
images as thumbnails by clicking [Set].
Thumbnail (file reference box)
Register the arbitrary camera images as thumbnails.
Select images in JPEG or PNG format. The available
image size is from 64×36 to 1920×1080 (width ×
height).
Delete
Delete thumbnails in the selected preset.
Speed
Pan/tilt speed when recalling the selected preset.
This is available when [Speed select] is set to
[Separate].

PTZ TRACE (BRC-X400/X401)

Preset mode
PTZ trace list
PTZ trace
operation
panel
PTZ TRACE is a function used to record pan/tilt/
zoom operations, controlled by the remote
commander or a remote controller, and then to
play back the operations when necessary. Up to
16 pan/tilt/zoom positions can be recorded for
up to 180 seconds.
Notes
• If pan and tilt limits are configured in the PTZ
control tab after recording operations, the pan
and tilt limits are not applied during playback.
To use the PTZ trace function and pan/tilt limit
function together, first configure the pan/tilt
limit settings, and then use the PTZ trace
function.
• All recorded PTZ traces will be erased if the
image flip setting is changed.
• All recorded PTZ traces may be erased if the
video output format is changed.
• Playing preparation will restore the Zoom
mode and Slow Pan-Tilt mode to their states
held during recording.
Preset mode
Display the current preset mode.
90
Preview
PTZ trace
status