Operating The Menus Of The Camcorder - Sony PMW-EX3 Operating Instructions Manual
Solid-state memory
camcorder
Hide thumbs
Also See for PMW-EX3:
- Service manual (314 pages) ,
- Operating instructions manual (163 pages) ,
- Instructions (2 pages)
Table of Contents
Advertisement
• The following controls of the camcorder
becomes inoperative when the Remote Control
Unit is connected.
—GAIN switch
—WHITE BAL switch
—SHUTTER switch
—BARS/CAM button
—WHT BAL button
—FULL AUTO button
• Direct menu operation of the camcorder is
disabled when the Remote Control Unit is
connected.
• The ECS frequency value displayed on the
Remote Control Unit may slightly differ from
that on the camcorder.
Releasing Remote Control mode
Turn off the camcorder and disconnect the remote
control device.
The settings on the controls on the camcorder
become valid.
Operating the Menus of the
Camcorder
In Remote Control mode,
(the icon for the
PP
Picture Profile menu) is displayed at the bottom
with the Setup menu icons, enabling you select
the Picture Profile menu from this screen.
CAMERA SET
Au t o BLK Ba l ance
Gain Setup
B
Shu t t e r
B
EX Slow Shut t e r
B
00:00
Shot Tr ans i t ion
B
MF Ass i s t
: O f f
PP
Note
The menu items that cannot be set in Remote
Control mode are shaded and cannot be selected.
Operating the menu from the RM-B150/
B170
Set the camcorder to Camera mode by setting the
power switch to the CAMERA position in
advance.
1
Set the DISPLAY switch to MENU.
The menu of the camcorder appears on the
monitor screen connected via the MONITOR
connector of the RM-B150/B170.
2
Select and set the menu items using the
MENU SELECT knob and the
CANCEL/ENTER switch.
3
When the settings are completed, set the
DISPLAY switch to ON or OFF to exit
the menu.
For details on operations of the RM-B150/B170,
refer to the Operation Manual of the RM-B150/
B170.
Operating the menu from the RM-B750
Set the camcorder to Camera mode by setting the
power switch to the CAMERA position in
advance.
1
Press and light the MONITOR button
then press the VF MENU button.
The menu of the camcorder appears on the
RM-B750 display and the monitor screen
connected via the MONITOR connector of
the RM-B750.
2
Select and set the menu items, using the
MENU SELECT knob, ENTER button,
and CANCEL button.
3
When the settings are completed, press
the VF MENU button to exit the menu.
For details on operations of the RM-B750, refer to
the Operation Manual of the RM-B750.
Operating the Slow & Quick Motion
recording from the Remote Control Unit
When the Remote Control Unit is connected,
selection of “S&Q Motion” is enabled on the
CAMERA SET menu, and you can perform Slow
& Quick Motion recording from the Remote
Control Unit.
Before starting Slow & Quick Motion recording,
make the necessary settings on the menu.
1
Select “S&Q Motion” from the
CAMERA SET menu.
Page 143
- Quick Links:
- Formatting an Sxs Memory Card
- Others Menu
Hide quick links:
Advertisement
Table of Contents
