Table of Contents
Advertisement
4.
Slide one of the rubber washers to the base of the tube.
5.
Drill a 1-inch (2.5 cm) hole through the table.
6.
Guide the cable through the hole in the table. Then, place the tube through the hole in the table and gently press the
microphone down.
7.
Attach the remaining rubber washer and wing nut from underneath the table. Then, tighten the wing nut to secure the
microphone on the table.
Optional: use the hole in the wing nut to insert a cable tie for cable management.
Shure Incorporated
19/55
Advertisement
Table of Contents
