Table of Contents
Advertisement
◦ Web Conferencing Software:Assign the audio input and output device settings to the appropriate Dante transmitter and
receiver channels.
③ Network switch to ANI4OUT
Use network cables to connect each ANI4OUT to the network switch. Each interface receives 4 channels of Dante audio,
and converts them to 4 analog signals, delivered through XLR outputs or block connectors.
④ Audio from far end to amplifier
Route the far-end audio to an amplifier.
⑤ Amplified audio signal to loudspeakers
Connect the loudspeakers to the amplifier to deliver the audio from the far end.
Video Conference
① Microphone to network switch
Connect the microphone output with a network cable to any port on the switch that supplies power over Ethernet (PoE).
② Computer to network switch
Connect a computer to the network switch to provide control of the microphone and other networked components through
the software control panel.
Shure Incorporated
14/55
Advertisement
Table of Contents
