Table of Contents
Advertisement
CHARGING DEVICES VIA USB
• Connect a USB cable (not included) to one of
the two USB ports located on the back of the
unit to charge devices.
• Monitor the charging on your device. Some
devices use a proprietary charging method and
will not charge using the USB port. If this
happens, you must charge your device using
the charger that came with it.
BATTERY BACK-UP
The unit comes with a CR-2450 back-up battery installed to maintain
clock settings in the event of a temporary power failure. Remove the
battery pull tab before use. When the battery icon on the display is
flashing, it is time to replace the back-up battery.
1. Make sure the AC adapter is connected, or you will lose your
clock settings during battery replacement.
2. Use a Phillips screwdriver to unscrew the battery compartment door.
3. Remove the exhausted battery and insert a new CR2450 battery.
4. Replace the compartment door. Do not overtighten the screw.
DC 5V
2.4A
Unit must be plugged into a
working outlet to charge devices.
DC 5V
2.4A
T R E S E T
T
E
E
S
S
E
E
R
R
R E S E T
T
T T E S T
S
S
E
E
T
T
T E S T
Advertisement
Table of Contents
