Related Manuals for Taga Harmony HTA-600B
Summary of Contents for Taga Harmony HTA-600B
- Page 1 HTA-600B HIGH-FIDELITY HYBRID INTEGRATED AMPLIFIER OPTICAL MUTE HT A -600B DIMMER PHONES BT OP T HTA- 600B Instruction Manual Edition 08-2020...
- Page 2 Introduction Thank you for purchasing this TAGA Harmony amplifier! HTA-600B utilizes 2 x 6H3 Russian vacuum tubes in the preamp section serving as a buffer amplifier and a pair of TDA7296 transistors in the output. The HTA-600B combines the best of both worlds - soft and analog-like sound character provided by tubes and adding to that high dynamics and power of transistors.
-
Page 3: Table Of Contents
Contents Safety Instructions Remote controller Front and Rear Panel Hooking up speaker cables Hooking up the amplifier Operation Bluetooth Connection ® Additional Information Specifications... -
Page 4: Safety Instructions
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 5 Safety Instructions 1. Read Instructions - All the safety and operating instructions 13. Overloading - Do not overload wall outlets, extension cords or should be read before the product is operated. integral convenience receptacles as this can result in a risk of fire 2.
-
Page 6: Remote Controller
Remote Controller • Always use AAA batteries and do not use the rechargeable batteries. • Do not mix new batteries with old batteries or different kinds of batte- ries. • If the batteries run out, remove the old batteries and replace them with new ones within several minutes. -
Page 7: Front And Rear Panel
Remote Controller CD Input Selector Button Line Input Selector Button Bluetooth Input Selector Button ® Optical Input Selector Button Mute Button Volume Buttons (▲/ ▼) Dimmer Button Front and Rear Panel Front Panel: Input Selector Button Power Switch (ON and OFF) Headphone ¼”... -
Page 8: Hooking Up Speaker Cables
Front and Rear Panel Rear Panel: 14. Analog Stereo RCA Inputs CD / LINE 15. Digital Input OPTICAL 16. Preamplifier Stereo RCA Output 17. Speaker Right Channel Output (Speaker Connectors) 18. Speaker Left Channel Output (Speaker Connectors) 19. Power Cable Input and Fuse Box 20. - Page 9 Hooking Up Speaker Cables Connecting speaker cables Speaker cables have 2 conductors. Each conductors should be connected to a separate speaker connector - mind the polarity while connecting. For each conductor: 1. Remove approximately 10 mm (3/8”) of insulation from the end of the conductor. Twist the bare wires firmly together.
-
Page 10: Hooking Up The Amplifier
Hooking up the Amplifier Right speaker Left speaker Smartphone, tablet, etc. CD player etc. Speaker cables Interconnect RCA Optical cable Interconnect RCA FM/AM tuner, etc. Video game console, DVD / Blu-ray Player etc. Interconnect RCA External power amplifier, powered speakers etc. Headphones Make sure the amplifier is turned off (the Power Switch and the Power... -
Page 11: Operation
Hooking up the Amplifier Preamplifier Output (PRE OUT) : this amplifier is equipped with a preamplifier output. Using an RCA interconnect cable (not supplied with this product) you can connect to it external equipment (power amplifier, powered speakers, active subwoofer etc.). The PRE OUT level is variable controlled according to the Volume Regulator. - Page 12 Operation Listening at high volume can cause hearing damage. Volume Regulator (front panel and remote controller): Using the Volume Regulator on the front panel or down ▼ and up ▲ buttons on the remote controller, you can adjust the sound volume from minimum (the knob – max counterclockwise) to maximum (the knob –...
-
Page 13: Bluetooth ® Connection
Bluetooth devices. ® • After a short time “HTA-600B” will appear on the screen of your audio source. • Select “Pair” on your audio source to connect with the amplifier. After connection is successful the Bluetooth Input Led Indicator will be illuminated ®... -
Page 14: Additional Information
Additional Information Break-In Your TAGA Harmony amplifier sounds great immediately after it is taken out of the carton but as all hybrid amplifiers, this amplifier requires a “break-in” period to reach its full sonic capabilities. -
Page 15: Specifications
Additional Information The warranty time for vacuum tubes is shorter than for other compo- nents of this device - for more details check your warranty terms or contact a local dealer. The vacuum tubes are installed inside the device and should be replaced only by qualified service personnel. - Page 16 We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Amplifier Remote Controller Bluetooth Antenna ® Power Cable Instruction Manual Your product is marked with the symbol as showed on the left.