Page 2
The removable IEC power cable gives you an option to upgrade your system with a premium audiophile power cable in any time. The HTA-1200 is a splendid mixture of analog tube sound, power, precision, purity and multidimensional soundstage imaging! Cleaning Do not use strong or abrasive cleaners.
Contents Safety Instructions Important Safety Instructions Remote controller Front and Rear Panel Hooking up speaker cables Hooking up the amplifier Operation Additional Information Specifications...
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE CHASSIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The triangle containing a lightning symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Important Safety Instructions 1. Read Instructions – All the safety and operating instruc- 13. Overloading - Do not overload wall outlets, extensions tions should be read before the product is operated. cords, or integral convenience receptacles as this cas 2. Retain Instructions – The safety and operating instruc- result in a risk of fire or electric shock.
Remote Controller Battery Installation 1. Prepare two AAA batteries. 2. Remove the rear cover. 3. Insert the batteries into the battery compartment. Carefully follow the polarity diagram inside the battery compartment ( positive + and negative - symbols). 4. Reinstall the rear cover. Note: •...
Remote Controller Mute Button Line / CD / AUX Input Selector Button Phono (MM and MC) Input Selector Button Coaxial / Optical Input Selector Button Volume Buttons (w / s) Front and Rear Panel Front Panel: 1. Input Selector 2. Power Switch (ON and OFF) 3.
Front and Rear Panel Rear Panel: 14. Phono Ground Screw 15. MM / MC Phono Cartridge Selector 16. Analog Stereo RCA Inputs CD / LINE / AUX / PHONO 17. Digital Inputs OPTICAL / COAXIAL 18. Preamplifer Stereo RCA Output 19.
Hooking up the Amplifier 1. Make sure the amplifier is turned off (the Power Switch is in the top position and the Power Cable is removed). 2. Turn the Volume Regulator to MIN (max counter clockwise). 3. Using speaker cables (not supplied with this product) connect your speakers to the SPEAKERS OUT connectors located on the rear of the amplifier (check “Hooking Up Speaker Cables”...
Hooking up the Amplifier console etc.) depending on a digital output your audio source is equipped with, connect it to one of digital inputs: OPTICAL or COAXIAL. Use a digital optical cable for the OPTICAL input and a digital coaxial cable for the COAXIAL input (the cables are not supplied with this product).
Page 11
Operation Headphones connection: When headphones (not supplied with this product) are plugged into the headphone output (Headphones) the transmission of sound to the speakers and PRE OUT is switched off. The speakers and PRE OUT are again active after you disconnect the headphones.
OFF to switch it off. Additional Information Break-In Your TAGA Harmony amplifier sounds great immediately after it is taken out of the carton but as all hybrid amplifiers, this amplifier requires a “break-in” period to reach its full sonic capabilities.
Page 16
We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony speaker cables and other installation accessories. Kit Content: Amplifier Remote Controller Batteries Power Cable Instruction Manual Your product is marked with the symbol as showed on the left.