Parent Unit Power Supply - Motorola MBP25-2 User Manual

1. Insert the plug of the rechargeable battery pack into the small socket inside
the battery compartment as shown above and fit the battery pack into the
compartment.
2. Place the battery cover over the compartment and gently tighten the
screw in a clockwise direction using a Small cross head or Flat end
screwdriver.
2.3

Parent Unit Power Supply

IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is
recommended. This will allow the unit to operate on battery in the event of a
power failure, or when moving to a different room.
1. Connect the small plug of the power adapter to the parent unit and the
other end to the electrical outlet. Only use the enclosed power adapter (6V
DC/500mA) with the slightly smaller DC plug.
Press and hold the P
2.
the parent unit.
Getting Started
Small cross head or
Flat end screw driver.
POWER ON/OFF button for 1 second to turn ON
9