Hitachi Universal V2 Rack Accessories; Third-Party Rack Support For Db60 Dense Intermix Drive Trays - Hitachi 88-02-0 Series Hardware Reference Manual

Rail kit
2. CGR: Corner guide rail kit A3BF-HK-GL-740-1.

Hitachi Universal V2 Rack accessories

The following table provides rack accessory information for VSP G series storage
systems.
Storage system
VSP Gx00 models

Third-party rack support for DB60 dense intermix drive trays

Due to the size and weight of the DB60 dense intermix drive trays used with VSP Gx00
models, pay close special attention when mounted in third-party racks.
When mounting DB60 dense intermix drive trays in third-party racks, observe the
following guidelines and see the following figure.
Use anti-tilt floor plates or ceiling-mounted fixing brackets to stabilize the rack.
■
Use a rack that is at least 40.94 in. (1040 mm) deep to accommodate the DB60 dense
■
intermix drive tray and cable-management arms.
Dense tray rail kits require square mounting holed racks.
■
Use a ladder to service the DB60 dense intermix drive tray if the drive tray is mounted
■
above shelf height RU32.
Hitachi Virtual Storage Platform G700 Hardware Reference Guide
Hitachi Universal V2 Rack
Table 23 Accessories for the Hitachi Universal V2 Rack
Front door
Optional, must be
ordered separately
(A3BF-DR).
Appendix F: Non-Hitachi racks
Hitachi Universal V2 Rack accessories
Third-party rack
Rear door
Included with rack Not included with
rack, must be
ordered separately.
A quantity of two
must be ordered
per rack (A3BF-Z-
PAN-1200).
Side panels
112