Advertisement
Check compatibility of vehicle and accessories
Requirements
Vehicle
Navigation
Limitations
Factory-DVD-changer
Factory-iPod-interface
Installation
1. Locate OBD-port and remove cover
2. Turn on ACC
3. Wait until the navigation has booted
4. Plug coder into OBD-port
5. The navigation will re-boot
6. When the navigation's startup-screen shows, remove coder from OBD-port
To remove the CD-changer option from the navigation's menu repeat steps 1.-6.
After the first use on a vehicle, the coder OBD-E65-CDC-01 is personalized to this vehicle. On
this vehicle the enabling and removing the CD-changer option can be repeated without limit.
The OBD-E65-CDC-10 can enable exactly 10 times regardless of the vehicle and remove CD-
changer option unlimited times.
Technical Support
Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered
trademarks ® of their corresponding legal owners.
Version 05.04.2011
7series (E65/66)
Navigation system Professional E65
Must NOT be installed.
Must NOT be installed.
Caraudio-Systems Vertriebs GmbH
manufacturer/distribution
In den Fuchslöchern 3
D-67240 Bobenheim-Roxheim
email support@caraudio-systems.de
OBD-E65-CDC-xx
Advertisement
