Page 1
Important Safety..General Instructions..Parts Included..LED3S19 Assembly Instructions..Instructions For Mounting LED6S19..Maintenance Recommendations..Warranty Policy..Troubleshooting Tips..
Page 2
THANKS with drop-offs, drastic slopes, or soft bottom mate- We at Kasco Marine, Inc. would like to both thank and rial. congratulate you on your purchase of the Submersible • Do not use a canoe or boat that tips easily during LED Light Kit.
Page 3
• ¼” Stainless Steel Flat Washer (6) must provide at least the same submersion to properly • ¼” Stainless Steel Nut (6) cool the fixture. Operating the fixtures out of water • ¼” x ½” Stainless Steel Bolt (12) will damage the LED and void warranty. •...
Page 4
5. Install the ¼” Flat Washer, ¼” Lock Washer and protected outlet and timer. ¼” Nut against the underside of the float tab as shown in Fig. 5. Tighten the nut until snug using the 7/16” Instructions for mounting LED3S19 on models: wrench.
Page 5
Fig. 10. Tighten the nut until snug using the 7/16” protected outlet and timer. wrench. Fig 10 Instructions For Mounting LED6S19 Instructions for attaching brackets on the float prior to mounting the light fixtures on 2 HP or larger Kasco units. Parts needed: • Lower float brackets (6) •...
Please keep the original box for maintenance shipping. Any required repairs need to be performed by Kasco Ma- rine. Any alterations or changes made to Kasco units by an The following maintenance procedures can be utilized to unauthorized source will void the warranty. This includes ensure many years of quality performance from your Kasco tampering with the unit, power cord, and/or control box.
Page 7
Attn: Repairs You can also email Kasco at sales@kascomarine.com . Note: Please contact Kasco to determine if the main power cord needs to be returned to be considered for warranty. The power cord may be needed to diagnose the failure.
Troubleshooting Tips Troubleshooting tips - light kit The following is provided to help diagnose a probable source of trouble. It is a guideline only and may not show all causes for all problems. For additional troubleshooting help contact your local distributor or visit www.kascomarine.com for additional help. NOTE: you may need to refer to your owners manual that was provided with your fountain for additional control panel settings and adjustments.
Page 9
LOCK WASHER, 1/4" 346065 BRACKET, S.S. LED MOUNTING 346090 CAP, LENS, S-19 LED LIGHT 345559 LENS KIT, 4 COLORS DO NOT ATTEMPT TO OPEN! CONTACT KASCO MARINE FOR INSTRUCTIONS REGARDING SERVICE OR REPAIR. MODEL LEDxS19-xxx 19 WATT LED LIGHT FIXTURE REPLACEMENT PARTS...
All repairs sent in MUST be accompanied by a copy of this completed sheet! • Address your Repair to Kasco Marine, Attn: Repairs (or to your Authorized Repair Center. • Shipping to Kasco or an Authorized Repair Center is paid for by the customer.
Fill in the information below and keep for your records. Model # (Ex. LED3S19)_______________________________ Serial # (Ex. 2101LEDS3001)____________________________ Purchase Date:_____________________ Purchased From:___________________________________ Registration Date: ___________________________ Kasco Marine, Inc. 800 Deere Rd. Prescott, WI 54021 Phone (715) 262-4488 • Fax (715) 262-4487 www.kascomarine.com • sales@kascomarine.com 884050...