Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kasco WaterGlow RGBC5
Summary of Contents for Kasco WaterGlow RGBC5
- Page 1 MOVING WATER FORWARD, SINCE 1968 RGBC5 Composite WaterGlow Lighting Operation & Maintenance Manual Document number 884102 Document version 2021.2.0 800 Deere Rd. Prescott, WI 54021 | 715.262.4488 | sales@kascomarine.com | kascomarine.com RGBC5 WATERGLOW LIGHTING MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Safety First ..........................2 Parts Included .........................3 Mounting Instructions ......................4 Alternate Mounting Instructions ..................6 Control Panel Installation & Operation ................7 Control Input Features ......................8 Maintenance Recommendations ..................9 Troubleshooting Tips ......................9 Warranty ..........................11 Repair .............................11 Non-Warranty Repairs ......................12 Repair Contact Form ......................13 QUESTIONS? 715.262.4488 kascomarine.com | sales@kascomarine.com... -
Page 3: Safety First
• Kasco WaterGlow lighting kits are intended for use with a Listed control panel having a GFCI protected receptacle, or field wiring terminals and disconnect switch, or a timer with a disconnect for use with a GFCI receptacle. They are intended to be mounted on a floating fountain or aerator for use in a natural or man-made body of water to comply with NEC Article 682. -
Page 4: Parts Included
Back to Contents PARTS INCLUDED ID Description Qty Part No. RGBC5 fixture 347000 Cord connector O-ring 345035 10-32 thumb nut 345043 #10 split lock washer 771037 Bracket O-ring 345008 Composite light bracket 345007 10-32 x 1/2” hex screw 345042 Snap-on light clip 361445 1/4”-20 x 1-3/8”... -
Page 5: Mounting Instructions
Back to Contents MOUNTING INSTRUCTIONS 1. Attach the bracket (F) to the light fixture (A) by fitting the head of the 10-32 x 1/2’’ hex screw (G) into the tabs on each side of the fixture. Place one bracket O-ring (E), one #10 lock washer (D), and one thumb nut (C) on each #10 screw outside the bracket. - Page 6 Back to Contents MOUNTING INSTRUCTIONS (CONT.) 3. After attaching the unit to the float according to fountain/aerator instructions, push the clips into recess- es on the float until you hear an audible click indicating the fixture is secure. Ensure clip is fully seated on float 4.
-
Page 7: Alternate Mounting Instructions
Supplementary hardware is required in order to mount RGBC5 light fixtures to a large (2HP+) surface aera- tor. Use the additional hardware kit (P/N 840303 for 3 light fixtures or 840306 for 6 light fixtures). These kits are sold separately. Contact Kasco Marine at sales@kascomarine.com or your local distributor for order information. -
Page 8: Control Panel Installation & Operation
2. The RGB control box is ready to mount next to your Kasco fountain control box (mount a minimum of 5ft from water) using two exterior-grade wood screws; one for the top and one for the bottom hanger. -
Page 9: Control Input Features
“aux” style 3.5mm connection. Do not connect to a line level (amplified speaker) output. Kasco recommends a 3.5mm “Y” adapter to allow for connection of the audio source to the RGB controller and a stereo amplifier simultaneously if desired. -
Page 10: Maintenance Recommendations
It may not be dark enough for the photo eye on the control panel to activate. • Kasco C-25, C-85, and C-95 control panels have a photo eye on the left side of the enclosure exterior. This photo eye measures ambient light. To activate, the photo eye must not measure any ambient light for at least several minutes. - Page 11 Back to Contents TROUBLESHOOTING TIPS (CONT.) • C-25 control panel: The C-25 timer must be turned on (fountain operating) to allow the light circuit to energize. • C-85, or C-95 control panel with GFCI outlet and photo eye control: The fountain timer must be turned on (fountain operating) to allow the light circuit to energize.
-
Page 12: Warranty
Warranty Information section. Once warranty coverage has been established, the light kit may be sent to Kasco Marine or any Kasco Au- thorized Repair Center for evaluation and repair. REPAIR The LED light fixtures are sealed and do not require any physical maintenance other than cleaning. -
Page 13: Non-Warranty Repairs
Most failed equipment can be repaired at substantially lower costs than replacement with new. If your light kit requires repair and is no longer covered under warranty, please contact Kasco Marine or your local dis- tributor for available options. Please ship according to the instructions on the repair form. -
Page 14: Repair Contact Form
Back to Contents REPAIR CONTACT FORM • Kasco requires that all equipment sent for repair MUST be accompanied by this form and marked to Repairs attention. Kasco Marine • Unit should be cleaned before shipping. 800 Deere Road • Kasco is NOT responsible for shipping damage accrued in Prescott, WI 54021 return shipment.
Need help?
Do you have a question about the WaterGlow RGBC5 and is the answer not in the manual?
Questions and answers